Since the 10.1 SDK is due within 2 months, and there are some notable bugs in 10.0, should we wait for a version 10.1 Linux Academy?

I have written a javascript for adding breakpoint and reading a variable value, using DSS API. As of now I am running that script from scripting console of CCS using loadJSFile command. As I run the ...

The random explosion occurred during the power on and off. We observed that the PWM could not be turned off normally to 0V, but was stuck at 5V. This caused the MOS to fail to turn off normally, ...

I am facing following problems while installing the MacOS installer of MCU-PLUS-SDK. It says the .dmg file is damaged and it cannot be installed. Could you please check this.

The max number of iterations is dictated by the number of accumulators in the hardware accelerator. Interference statistics (which uses the accumulators) determines the threshold values to be used in ...

If you are wanting to configure a peripheral register as a DMA source or destination address, you want to use the "Manual" or "Variable/Function Name" options. Please see the explanation on the thread ...

This thread has been locked. If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this ...

I have built an 8-to-1 inverting summing amplifier using OPA820 where, R_f = R = 1K (unity gain). However, I can see a reduction in pulse fall-time which I don't understand. Does anyone who the reason ...

I use FDC2212, I try to measure two capacitance which are CU plane on a PCB. But capacitor interact each other. There is two shielding concept releated on datasheet. But I can not undestand How I use ...

Need your help to check below problem. V_CP1 is about 23V. This is for high side current sensing application. CS3_SP4 and CS3_SN4 are connected to a shunt resistor. When there is no current flow into ...

Need to drive analog PAL video over 5 meters coaxial cable, therefore it looks like capacitive AC-coupling is required. The question is if the OPA692 can drive the 75R coax load via large serial ...

My customer is trying to place the DataFlash area outside of the region setting, is there a problem? They are using IAR, it seems like IAR only have two regions can be set, and it is already used in ...